uP Configure - IN-uP4 Programming Software:

 

The uP Configure - IN-uP4 Universal Input Indicator Programming software has the following features:

• Easy user programming using USB connection.

• No power required while programming.

• No calibration required after range has been programmed.

To use the uP Configure - IN-uP4 Universal Input Indicator Programming software an XU-USB (Rev 1) key is required.

XU-USB (Rev 1)

Installation Notes:

• Ensure that the uP Configure - IN-uP4 Programming software is installed before plugging in the XU-USB (Rev 1) as this ensures that the required USB driver is installed first.
• When upgrading from a previous version - please disconnect the XU-USB (Rev 1) before installing.
• The uP Configure - IN-uP4 Programming software requires Microsoft .NET 4.0 to be installed first (Microsoft .NET 4.0 can be downloaded free).
• An Administrator account or password will be required for installation. Contact your IT support for this if needed.
• The XU-USB must be (Rev 1) or later! Older XU-USB versions will NOT connect with the IN-uP4.

WARNING: Ensure that all programming is carried out BEFORE any wiring takes place!

 

Download Now - 20.4MB - July 14, 2014 - (Ver 1.0.2.2)