HR Series - Mini Portable Data Loggers:

Please select a product below:

Description:

HR Series loggers are small, single and multi channel loggers housed in a rugged 20mm diameter 304 stainless steel case. High accuracy and large storage capacity make the HR series ideal for most industrial and commercial applications.
The HR loggers can also be left connected permanently to the PC for instantaneous viewing of the data. All data is real time (time and date stamped). All TruTrack loggers will connect directly to a modem for remote down loading of data and can also send SMS messages on an alarm condition.

Features:

Ordering Information:

Order code: Description:
T-HR Single Temperature
HT-HR Humidity & Temperature
THT-HR Humidity & Dual Temperature
Tc-HR Thermocouple Temperature, Accepts Type J, K, N, R and T probes (Does not include Thermocouple probe)
HHT-03 Type K Thermocouple Mini-Spear probe for Tc-HR, range -30/+300C (Other types of thermocouple probes are also available)
Tc-HR Plug Set 70mm lead c/w plugs (Specify thermocouple type)
Pt-HR RTD Pt100/Pt500/Pt1000 Temperature (Does not include RTD probe)
TP-Pt100 Pt100 temperature probe for Pt-HR, range -100~150C
mV-HR ±50mV / ±100mV / ±200mV / ±400mV (Does not include test lead)
mV-HR Lead Test Lead set for mV-HR logger
WT-HR Water Level / Temperature (see WT-HR page for ordering codes)
pH-HR pH / Temperature (Does not include probe)
M-## pH probe pH probe for pH-HR. Note: We recommend using a pH probe that has a built in Pt100 temperature sensor for the best possible accuracy with the pH-HR.
pH-HR Plug Set Fit plug set to pH probe for use with pH-HR logger.
GP-HR General Purpose (see GP-HR page for ordering codes)
Download options:

SWDL-DLC3USB
SWDL-DLC3		 OmniLog Software (used with all TruTrack data loggers):
OmniLog Installation CD and USB download cable Kit
OmniLog Installation CD and RS232 download cable Kit

DLC3USB
DLC3		 Spare download cable:
HR Series USB download cable
HR Series RS232 download cable

T-HR

T-HR - Single Temperature

The T-HR is a small single channel high resolution (12 bit) Temperature data logger.


HT-HR

HT-HR - Humidity & Temperature

The HT-HR is a small Dual Channel High Resolution (16 bit) Humidity and Temperature data logger.

The humidity and temperature sensors are housed in a 60 micron Stainless Steel filter at the top of the logger.

The HT-HR (Mk 4) now uses a Sensirion SHT15 digital humidity sensor giving ±2.0%RH accuracy from 10%RH to 90%RH.


THT-HR

THT-HR - Humidity & Dual Temperature

The THT-HR is a small Three Channel High Resolution (10 bit) Humidity and Temperature data logger. *64,000 sample capacity.

The humidity and temperature sensors are housed in a 60 micron Stainless Steel filter at the top of the logger. There is an additional external temperature sensor with a soil penetration probe and 1500mm of cable.

The THT-HR uses a Sensirion SHT11 digital humidity sensor giving ±3.0%RH accuracy from 20%RH to 80%RH.


Tc-HR

Tc-HR - Thermocouple Temperature

The Tc-HR is a small Two Channel High Resolution (16 bit) Temperature data logger.

The logger connects to an external Thermocouple probe and also has an internal temperature sensor for convenient logging of ambient temperature if desired.
The logger accepts Type J, K, N, R and T thermocouple probes (factory set to Type K).

Please Note: Tc-HR data loggers are not supplied with a thermocouple probe. These can be ordered separately from Intech Instruments if required.


Pt-HR

Pt-HR - External RTD (Pt100/Pt500/Pt1000) Temperature

The Pt-HR is a small Two Channel High Resolution (16 bit) Temperature data logger.

The logger connects to an external Pt100, Pt500 or Pt1000 sensor. It also has an internal temperature sensor for convenient logging of ambient temperature if desired.

Please Note: Pt-HR data loggers are not supplied with a RTD probe. These can be ordered separately if required.


mV-HR

mV-HR - ±50mV / ±100mV / ±200mV / ±400mV

The mV-HR is a small, two channel, high resolution (16 bit) Voltage data logger.
It also has an internal temperature sensor for convenient logging of ambient temperature if desired.

Please Note: mV-HR data loggers are not supplied with a test lead set. These can be ordered separately from Intech Instruments if required.


WT-HR

WT-HR - Water Level / Temperature

The WT-HR is a Three Channel, High Resolution (12 bit), Water Height and Dual Temperature data logger fitted with a water height probe. *64,000 sample capacity.

A temperature sensor is located at the bottom of the water probe and another is mounted in the logger so both water and air temperatures can be logged.

Please Note: The standard version of Water Logger is constructed from 304 Stainless. If the logger is used in brackish water that is warm, it can pit and corrode the stainless. We recommend the use of the version made from 316 stainless for such applications.


pH-HR

pH-HR - pH / Temperature

The pH-HR is a small three channel high resolution (12 bit) pH and Temperature data logger housed in a rugged 304 stainless steel case.

The logger connects to an external pH probe and also has the option of connecting to an external Pt100 temperature probe to allow temperature compensation of the pH reading. Many pH probes have a built in Pt100 temperature sensor for convenient connection.
The pH-HR logger also has an internal temperature sensor for convenient logging of ambient temperature if desired.

Please Note: pH-HR data loggers are not supplied with a pH probe. These can be ordered separately from if required.
We recommend using a pH probe that has a built in Pt100 temperature sensor for the best possible accuracy with the pH-HR.


GP-HR

GP-HR - General Purpose

The GP-HR is a small High Resolution (12 bit) Multi Purpose data logger housed in a rugged 304 stainless steel case, that can be configured to accept input from a wide variety of sources.
It also has an internal temperature sensor for convenient logging of ambient temperature if desired.
MASSIVE storage capacity with the GP-HR mark 4 of over 1,000,000 8bit samples; or over 500,000 12bit samples!